88
6.2 Fault and Troubleshooting
The inverter will be shut down automatically if the PV power generation
system fails, such as output short circuit, grid overvoltage / undervoltage,
grid overfrequency / underfrequency, high environmental temperature or
internal malfunction of the machine. The fault information will be displayed
on the APP interface. Please refer to “5.4.3 Fault Recording” for detailed
operation.
The causes of a fault can be identified based on the faults listed in
Table 6-3 to Table 6-6. Proper analysis is recommended before contacting
after-sales service. There are 4 types of faults: Alarm, Protection, Fault and
Warn.
To Next Page
Loading...
