Craftex CX500 - Features

5
MODEL CX500 – 6” x 48” BELT & OSCILATING VERTICAL SPINDLE SANDER
As part of the growing line of Craftex woodworking equipment, we are proud to offer CX500 -6”
x 48” Belt/Oscillating Vertical Spindle Sand er. The Craftex name guarantees Craft Excellence.
By following the instructi ons and procedures laid out in this owner’s manu al, you will receiv e
years of excellent service and satisfaction. The CX500 is a professional tool and like all power
tools, proper care and safety procedures should be adhered to.
The oscillating sanding provides an extremely fine sanding finish
Easily interchanged spindles
Both tables can be tilted
Standard accessories can be stored at the side of the machine
Powder coated paint
Motor ................................... ..........1-HP, 60-HZ, 1720-RPM & 50-HZ, 1420-RPM
Spindle Size......................... ..........1/4”, 5/8”, 1-1/2” and 2”
Spindle Table Size............... ..........14.5” x 14.5”
Spindle Table Tilting Angle .. .......... 0° to 45°
Belt Size .............................. .......... 6” Width x 48” Length
Belt Sander Tilt .................... ..........0° to 45°
Belt Table Size .................... .......... 10” x 8”
Approx Weight ..................... .......... 74 Kgs
Warranty .............................. ..........3 Years
CX500–6”x48” Belt/Oscillating
Vertical Spindle Sander
FEATURES