Need help?Do you have a question about the Crate LIMO TX50D and is the answer not in the manual?
Power| output power rating | 50W RMS @ 10% THD, 4 ohms, 13.6VDC in |
|---|---|
| power requirements | Internal 12 volt DC power supply |
| DC adapter | for use with 120VAC |
Input and Output| input impedance | 1M ohm |
|---|---|
| maximum signal accepted - Mic Low Z | 2V peak to peak |
| maximum signal accepted - Mic Hi Z | 12V peak to peak |
Gain and Sensitivity| gain - Mic | 57dB High Z, 72dB Low Z |
|---|---|
| gain - Instrument | 44dB w/Gain switch out, Ch2, 85dB w/Gain switch in, Ch1 |
EQ Settings| EQS MIC Low | ±15dB @ 60Hz |
|---|---|
| EQS MIC Mid | ±15dB @ 600Hz |
| EQS MIC High | ±15dB @ 10kHz |
Size and Weight| width | 15-1/2” |
|---|---|
| height | 13” |
| depth | 12” |
Explains the meaning of graphical symbols used in the manual for user safety.
Features two independent input channels for versatile sound.
Offers built-in digital sound effects for enhanced audio.
Allows connection of external effects units for sound modification.
Enables playback of external audio sources like CD players.
Provides remote control for channel selection and DSP functions.
Allows for private practice sessions without external speakers.
Features a battery for portable operation, offering up to 8 hours of playtime.
Indicates the current battery charge level with color-coded lights.
Can be powered by AC adapter or 12V vehicle adapter for flexible use.
Includes a 10" woofer and 2" Piezo tweeter for full-range sound.
Constructed with a durable, lightweight polymer for portability.
Rubber feet allow for use as a low/high angle monitor or upright speaker.
Facilitates mounting on a speaker stand for PA applications.
Details the sealed lead-acid 12-volt battery for portable use.
Explains charging process, LEDs, and usage times.
Provides contact info for service and potential battery issues.
Explains powering the amp via a car's 12V socket.
Connects low impedance microphones via XLR connector.
Connects high impedance microphones via 1/4" connector.
Adjusts output level, low, mid, and high frequencies for the mic channel.
Controls the amount of Digital Signal Processing applied to the mic channel.
Allows patching external effects devices directly into the amplifier.
Controls gain, tone shaping, and output for instrument channel 1.
Selects between instrument channel 1 or 2 for active controls.
Adjusts low, mid, high frequencies and output for instrument channel 2.
Adjusts DSP amount and selects various DSP effect types (delay, chorus, etc.).
Connects CD or tape players for background music playback.
Connects a footswitch for remote channel selection and DSP control.
Connects headphones for private listening, disabling internal speakers.
Turns the amplifier on/off and indicates power/battery status.
Connects the AC wall adapter for charging the internal battery.
Connects a 12VDC adapter for vehicle power.
Details methods for patching external effects units using various cables.
Setup for vocals, instrument, rhythm machine, and external effects.
Setup for instrument and external audio player via CD input or channel.
Setup for vocals, instrument, and tape player via CD input.
To Next Page
