Need help?Do you have a question about the Creality CR-10S Pro and is the answer not in the manual?
General| Build Volume | 300 x 300 x 400 mm |
|---|---|
| Layer Resolution | 0.1-0.4 mm |
| Print Speed | up to 180 mm/s |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | SD card, USB |
| Bed Leveling | Automatic |
| Frame Material | Aluminum |
| Bed Temperature | up to 110°C |
| Nozzle Temperature | up to 260°C |
| Heated Bed | Yes |
| Print Technology | FDM (Fused Deposition Modeling) |
| Resume Print Function | Yes |
| Supported Materials | PLA, ABS, TPU |
| Display | Touchscreen |
To Next Page
