Creality Falcon2 - Machine Assembly; Connect Air Pump

2. 连接机器与气泵 | Connect the machine with the air pump
2.1 拔掉气泵上的气嘴胶塞，再把机器上的硅胶管接到气泵的气嘴上。
2.1 Unplug the rubber plug in the air nozzle of the air pump, and connect the silicone tube from the machine to the air
nozzle of the air pump.
2.2 将气泵连接线插入机器左侧的气泵接口，旋钮开关可调节气流大小。
2.2 Plug the air pump cable into the air pump interface on the left side of the machine, and you can adjust the airflow
through the knob switch.
09