Tips: How to change resin?
Take out the resin vat slowly, pour out the remaining resin into the container, clean the resin vat,
pour in new resin,and then install the resin vat to the machine.
① Resin may cause skin irritation or an allergic skin reaction.
Please wear gloves before use to avoid direct contact with the skin.
② Do not exceed the maximum capacity scale of the tray when
pouring in laments to prevent them from ovelowing during the
printing process.
Pour the UV photosensitive resin into the resin vat. The slot capacity is 200ml/410ml。
200ml
410ml
T
7. Resin in
08
Caution:
To Next Page
Loading...
