1. Display macros
Click the button to display/hide the macro functions. (left sidebar
and in the control interface).
2. Console
Click the button to show/hide the console.
3. HOTEND PID calibration
Click to enter the calibration page, set the hotend calibration tempera-
ture, click to start calibration, and confirm that the calibration is com-
pleted according to the prompts, the system will automatically save.
9. Advanced options
4. HOTBED PID calibration
Click to enter the calibration page, after setting the calibration tem-
perature of the hotbed, click to start the calibration, and confirm the
completion of the calibration according to the prompt, the system will
automatically save.
14
To Next Page
Loading...
Need help?
General
