Creality TL4800 User Manual

5. Measuring resonances
Adjust the extrusion parameters and upper temperature limit according
to the printer configuration. Go to Other settings, Advanced options, and
click Measuring resonances.
5.1.2 After connecting and installing the sensor as shown, click Next
step.
5.1 Similar to Ender-3 S1 hotbed on the Y axis.
5.1.1 Enter the vibration compensation page, select the current
machine type and click Next step.
15

Creality TL4800 Specifications

General

Brand	Creality
Model	TL4800
Category	3D Printers
Language	English