Crestron Automate VX Series User Manual

Product Manual — Doc. 9324A IV-SAM-VXP-1B and IV-SAM-VXS-1B • 21
System Configuration
The Automate VXsystem can be configured using its web configuration interface as described in
the sections that follow.
NOTE:Most system configuration can be accomplished by using the Intelligent Video Room
Designer tool. This tool is available on the Crestron website and locally on the Automate
VXsystem.
Access the Web Configuration Interface
To access the web configuration interface for the Automate VXsystem, open the Chrome®
browser on the Automate VXsystem. The web configuration interface loads automatically.
To access the web configuration interface from a different device:
1. Enter the IP address of the camera switching system with port 3579 appended to the
address (for example, "10.1.10.31:3579")
Alogin page is displayed.
Login Page
2. Enter the following login credentials:
l
username:admin
l
password:1beyond
3. Select Login.
NOTE:Additional users can be set to access the Automate VXsystem. For more information,
refer to Admin and User Settings on page32
The web configuration interface opens with the Main tab open by default.

Crestron Automate VX Series Specifications

General

Brand	Crestron
Model	Automate VX Series
Category	Switch
Language	English