36 • IV-SAM-VXP-1B and IV-SAM-VXS-1B Product Manual — Doc. 9324A
Configure Audio
Audio input to the Automate VXsystem is not required for voice-activated camera switching.
For video conferencing, send audio directly from your DSP to your codec with a 400ms delay in
order to ensure proper lip sync.
For local recording or streaming with the system, activate the installed Dante Virtual Soundcard
by purchasing a license from www.audinate.com. Alternatively, use the line in input on the
system rear panel for an analog signal flow.
To Next Page
Loading...
