Crestron Automate VX Series User Manual

Product Manual — Doc. 9324A IV-SAM-VXP-1B and IV-SAM-VXS-1B • 31
NOTE:Lowering this value increases switch speed. If any motion or zooming is
observed during switching, increase this value.
l
Noise Delay:Determines how long a noise needs to occur before the system recognizes it.
This feature helps to avoid switching based on coughs or other short sounds.
l
Pause Delay:Determines how long after an active participant stops speaking before the
camera will switch to another camera or a default shot.
Advanced Settings
Select the Advanced tab to view the available advanced settings.
Advanced Tab
The following advanced settings can be configured.
Room Configurations
The RoomConfigurations setting allows for different microphones and room furniture
arrangements to be used. This is especially helpful within divisible and multipurpose rooms.
Each room configuration saves a separate copy of all the settings in the Automate VXsystem.
NOTE:The camera presets assigned to the Microphone Table are different for each room
configuration.
Room Configurations Settings
To change room configurations, use the drop-down menu to select the desired room
configuration. Information for the room configuration is shown in the table below the drop-down
menu.
NOTE:Loading a room configuration will discard any unsaved changes on your current room
configuration. Ensure any changes are saved prior to making a new selection.
Selecting a room configuration can also be called with an APIor Crestron command.

Crestron Automate VX Series Specifications

General

Brand	Crestron
Model	Automate VX Series
Category	Switch
Language	English