Product Manual — Doc. 9324A IV-SAM-VXP-1B and IV-SAM-VXS-1B • 23
Camera Table
For IPcontrol, enter the IPaddress of each connected camera in the IPcolumn of the Camera
Table. The camera number in the table must match the SDIport number that the camera is
connected to.
Camera Table Setting
The following camera models can be selected from the Model drop-down menu:
l
PTZ
l
AutoTracker
Transfer Camera Presets
Camera preset settings can be exported once installation is complete and then imported into
similar configurations.
CAUTION: Ensure that no custom presets interfere with any reserved presets. Presets 200
and 251–255 are reserved for Automate VXsystem functionality. Additional presets may be
reserved depending on the 1 Beyond cameras added to the system. Refer to the camera's
documentation for more information.
Transfer Camera Presets Setting
l
Select Import Presets to import all camera presets saved within the Import.xml file
(located within C:\Program Files\1 Beyond\Automate VX\Presets\Camera).
l
Select Export Presets to import all current camera presets to an Export.xml file (located
within C:\Program Files\1 Beyond\Automate VX\Presets\Camera).
NOTE:The Export.xml must be renamed to Import.xml prior to importing the exported
camera presets.