Crestron CHV-TSTAT and CHV-THSTAT Thermostats
C2Net-Device Slot in Configuration Manager
To incorporate a CHV-TSTAT or CHV-THSTAT into the system, drag the symbol
for the thermostat from the Crestron Sensing Modules folder of the Device Library
and drop it on C2NET-Device slot in System Views. The PRO2 system tree displays
the thermostat symbol in Slot 9, with a default Net ID of 2A as shown in the example
graphic below.
C2Net Device, Slot 9
Setting the Net ID in Device Settings
Double-click the thermostat icon in the upper pane to open the “Device Settings”
window. This window displays the device information. Select the Net ID tab to
change the Net ID, as shown in the following graphic.
“Device Settings” Window for the CHV-THSTAT
Operations and Installation Guide – DOC. 8163C Thermostats: CHV-TSTAT and CHV-THSTAT • 61
To Next Page
Loading...
Need help?
General
