Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System
Operations Guide – DOC. 7219D DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC • 43
3. Adjust the program bass level with the j and k buttons.
NOTE: While adjusting the program bass level, the program volume level
can be adjusted by turning the VOLUME control clockwise to raise the
volume, or counterclockwise to lower the volume. When adjusting the
volume, the display changes to indicate the volume level.
4. Press MENU or ENTER to save changes and return to the previous screen.
Set the Program Treble Level
To set the program treble level:
1. Access the “Program Output” menu as described on page 42.
2. Press the k or j buttons until Treble is displayed on the LCD and press
ENTER to display the “Program Treble” menu. The current treble level is
displayed.
“Program Treble” Menu
3. Adjust the program treble level with the j and k buttons.
NOTE: While adjusting the program treble level, the program volume
level can be adjusted by turning the VOLUME control clockwise to raise
the volume, or counterclockwise to lower the volume. When adjusting the
volume, the display changes to indicate the volume level.
4. Press MENU or ENTER to save changes and return to the previous screen.
Set the Program Delay
To set the program delay time:
1. Access the “Program Output” menu as described on page 42.
2. Press the k or j buttons until Prog. Delay is displayed on the LCD and
press ENTER to display the “Program Delay” menu. The current delay
time is displayed.
“Program Delay” Menu
3. Adjust the program delay time with the j and k buttons.
The highest possible program delay time is 85 milliseconds.
NOTE: While adjusting the program delay time, the program volume level
can be adjusted by turning the VOLUME control clockwise to raise the
volume, or counterclockwise to lower the volume. When adjusting the
volume, the display changes to indicate the volume level.
4. Press MENU or ENTER to save changes and return to the previous screen.