Crestron DMPS-100 User Manual

DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC
44 • DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC. 7219D
Set the
Program Minimum Volume
The “Prog. Min Volume” menu is used to set the lowest volume level of the program
output.
To set the program minimum volume level:
1. Access the “Program Output” menu as described on page 42.
2. Press the k or j buttons until Min Volume is displayed on the LCD and
press ENTER to display the “Prog Min Volume” menu.
“Prog. Min Volume” Menu
Prog. Min Volume
0% k
3. Adjust the program minimum volume level with the j and k buttons. The
highest program minimum volume level is 50%.
NOTE: While adjusting the program minimum volume level, the program
volume level can be adjusted by turning the VOLUME control clockwise
to raise the volume, or counterclockwise to lower the volume. When
adjusting the volume, the display changes to indicate the volume level.
4. Press MENU or ENTER to save changes and return to the previous screen.
Set the
Program Maximum Volume
The “Prog. Max Volume” menu is used to set the highest volume level of the
program output.
To set the program maximum volume level:
1. Access the “Program Output” menu as described on page 42.
2. Press the k or j buttons until Max Volume is displayed on the LCD and
press ENTER to display the “Prog. Max Volume” menu.
“Prog. Max Volume” Menu
Prog. Max Volume
100% j
3. Adjust the program maximum volume level with the j and k buttons. The
lowest program maximum volume setting is 70%.
NOTE: While adjusting the program maximum volume level, the program
volume level can be adjusted by turning the VOLUME control clockwise
to raise the volume, or counterclockwise to lower the volume. When
adjusting the volume, the display changes to indicate the volume level.
4. Press MENU or ENTER to save changes and return to the previous screen.
Adjust the
Program Startup Volume
The “Prog. Startup Vol.” menu is used to establish the program output’s volume
level setting when an input is selected.
To adjust the program startup volume level:
1. Access the “Program Output” menu as described on page 42.
2. Press the k or j buttons until Startup Vol. is displayed on the LCD and
press ENTER to display the “Prog. Startup Vol.” menu.

Crestron DMPS-100 Specifications

General

Brand	Crestron
Model	DMPS-100
Category	Projector
Language	English