DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC
48 • DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC. 7219D
Set the Auxiliary Output
Minimum Volume
The auxiliary output minimum volume control is used to set the lowest volume level
of the auxiliary output.
To set the auxiliary output minimum volume level:
1. Access the “Aux. 1 Output” or “Aux. 2 Output” menu as described on page
45.
2. Press the k or j buttons until Min Volume is displayed on the LCD and
press ENTER to display the “Aux. 1 Min Volume” menu.
“Aux. 1 Min Volume” Menu
3. Adjust the auxiliary output minimum volume level with the j and k
buttons. The highest auxiliary output minimum volume setting is 50%.
NOTE: While adjusting the auxiliary output minimum volume level, the
auxiliary output volume level can be adjusted by turning the VOLUME
control clockwise to raise the volume, or counterclockwise to lower the
volume. When adjusting the volume, the display changes to indicate the
volume level.
4. Press MENU or ENTER to save changes and return to the previous screen.
Set the Auxiliary Output
Maximum Volume
The auxiliary output maximum volume control is used to set the highest volume
level of the auxiliary output.
To set the auxiliary output maximum volume level:
1. Access the “Aux. 1 Output” or “Aux. 2 Output” menu as described on page
45.
2. Press the k or j buttons until Max Volume is displayed on the LCD and
press ENTER to display the “Aux. 1 Max Volume” menu.
“Aux. 1 Max Volume” Menu
3. Adjust the auxiliary output maximum volume level with the j and k
buttons. The lowest auxiliary output maximum volume setting is 70%.
NOTE: While adjusting the auxiliary output maximum volume level, the
auxiliary output volume level can be adjusted by turning the VOLUME
control clockwise to raise the volume, or counterclockwise to lower the
volume. When adjusting the volume, the display changes to indicate the
volume level.
4. Press MENU or ENTER to save changes and return to the previous screen.