Crestron HD-MD4X2-4K-E - Using the Front Panel OLED Display; Accessing and Navigating the OLED Display Menu

14
•
HD-MD-6X2/4X2/4X1-4K-E: 4K HDMI Switchers Supplemental Guide – DOC. 7761A
Using the Front Panel OLED Display
The front panel OLED display provides a menu that allows configuration of the switchers.
The following illustration provides a menu tree of the OLED display.
OLED Display Menu Tree
The following sections provide information about the OLED display menu.
Accessing and Navigating the OLED Display Menu
To access and navigate the OLED display menu, use the OLED push buttons and the
navigation pad on the front panel of the switchers.
OLED Push Buttons and Navigation Pad (HD-MD6X2-4K-E Shown)
To access the main menu of the OLED display, press the
MENU
button. The OLED display,
which displays two lines at a time, appears as shown on the following page.
Global EDID
Input 1
Input 2
Input 3
Input 4
Input 5 (HD-MD6X2-4K-E Only)
Input 6 (HD-MD6X2-4K-E Only)
Main Menu
Inputs
Output 1
Output 2 (HD-MD6X2-4K-E and
HD-MD4X2-4K-E Only)
Outputs
Status
DHCP
DHCP Renew (Displayed only if DHCP is ON)
IP Setup (Displayed only if DHCP is OFF)
Network
Details
Front Panel
Firmware Update
Restore
Device
Enter
MENU
HD-MD6X2-4K-E
EXIT



1 2 3 4 5 6
1 2
PWR
INPUT
OUTPUT
BACK
