Crestron HD-MD4X2-4K-E - Logging In to the Switcher

2
•
HD-MD-6X2/4X2/4X1-4K-E: 4K HDMI Switchers Supplemental Guide – DOC. 7761A
2. Open a web browser.
3. Go to the IP address of the switcher.
The Login page opens. For login information, refer to “Logging In to a Switcher”
below.
Logging In to a Switcher
The Login page allows access to the web interface of a switcher.
Login Page
To log in to a switcher, do the following:
1. Enter the username and password. The default username is admin, and the default
password is admin.
NOTE:
The username and password are case sensitive.
NOTE:
For enhanced security, it is recommended that the default username and
password be changed. For information about changing the username and
password, refer to “
Changing the Username and Password” on page 12.
2. Click the
Submit
button.
The Status page opens. For information about navigating the web interface, refer to
“Navigating the Web Interface” on the following page.