Product Manual — Doc. 8622E HZ-THSTAT • 170
System Configuration
Use the System Configuration screen to configure the System Type, System Performance, Radiant
Floor, User Controls, Humidistat, and Sensors to work with the connected HVAC system. For details,
refer to Configuration on page 45.
To configure a specific system type, refer to these sections of the Configuration on page 45 section.
l
Heat/Cool, 1 or 2 Stages, Forced Air or Radiant on page 52
l
Heat Pump, 1 or 2 Stages, Aux Heat or Dual Fuel on page 59
l
Radiant Floor Only (Floor Warming) on page 67
l
Radiant Floor Only (Space Heating) on page 73
l
Radiant Floor Only (Floor Warming/Space Heating) on page 78
l
2 Stage Heat (Stage 1 Radiant Floor)/1 Stage Cool on page 84
l
2 Stage Heat (Stage 1 Radiant Floor)/1 Stage Cool Heat Pump with 1 Stage Aux Heat on page 92
l
2 Stage Heat (Stage 1 Radiant Floor Warming/Space Heating)/1 Stage Cool on page 101
l
2 Stage Heat (Stage 1 Radiant Floor Warming/Space Heating)/1 Stage Cool Heat Pump with 1
Stage Aux Heat on page 109
l
4-Pipe FCU 1 Stage Heat/Cool, with optional Radiant Floor Stage, optional Floor Warming, and
optional Aux Heat Stage on page 144
l
2-Pipe FCU with 1 or 2 Stage Heat/Cool, with optional Radiant Floor Stage, optional Floor
Warming, and optional Aux Heat Stage on page 118
l
2-Pipe FCU with 1 or 2 Stage Heat, with optional Radiant Floor Stage, optional Floor Warming,
and optional Aux Heat Stage on page 127
l
2-Pipe FCU with 1 or 2 Stage Cool, with optional Radiant Floor Stage, optional Floor Warming,
and optional Aux Heat Stage on page 135
End User Access
Use the ENDUSERACCESS screen to modify the controls that are displayed on the user interface in the
Side menu. The MODE control cannot be hidden.
To hide controls for the Fan, Humidistat, or Radiant Floor, turn off the toggle next to Fan Control,
Humidistat Control, or Radiant Floor Control.
Display
Provides the same settings as the end user Display screen. For details, refer to Display on page 164.
To Next Page
Loading...
