Crestron Horizon HZ-THSTAT - Wireless Network

171 • HZ-THSTAT Product Manual — Doc. 8622E
Wireless Network
Provides the same settings as the end user Wireless Network screen but also includes IPSettings and
IPTable Setup. For details, refer to Wireless Network on page 166.
IP Settings
Use the IP Settings screen to switch between DHCP and static IP, and manually set the host name and
static IP settings.
When opening IP Settings, a warning appears:
Tap No to go back to WIRELESS NETWORK. Tap Yes to continue to IPSETTINGS. When continuing to
edit the IPSetting, consider the following:
l
Tap on the editable fields, such as Hostname, to initiate the keyboard.
l
Disable the DHCP toggle to edit the following settings: Static IPAddress, Static IPMask, Static
Default Router, Static IPPrimary DNS, and Static IPSecondary DNS.
NOTE: Changing any of these settings will prompt a reboot warning in the
INSTALLERSETTINGS. The changes will not go into effect until the thermostat reboots.