Crestron Horizon HZ-THSTAT - Location

Product Manual — Doc. 8622E HZ-THSTAT • 172
IP Table Setup
IPTable Setup allows the thermostat to be connected to a control system. An IP Table is a lookup table
used by Crestron Ethernet devices to map between IP IDs and IP addresses. Refer to the control system
documentation for details.
l
Network IP ID: Match the Network IP ID stated in control system's program.
l
Control System: Set the IP to the control system’s IP address or Hostname.
NOTE: When used with Crestron Home® OS this section will be auto populated when added to the
Crestron Home control processor.
Location
The thermostat utilizes the data entered in the LOCATIONscreen to provide accurate weather
information on the home screen.
NOTE: United States residents only can enter the Postal Code. Residents outside the United States
can enter the latitude and longitude.