Crestron Mercury CCS-UC-1 - Maintenance

16 • CCS-UC-1: Crestron Mercury Tabletop Conference System Supplemental Guide – DOC. 7844E
For additional details on configuring the CCS-UC-1 to operate with specific SIP servers,
refer to the RESOURCES tab at www.crestron.com/mercury
.
Configure the Date and Time
DEVICE Screen - Configure Date/Time
The device’s internal clock can be synchronized with a time server or set manually.
NOTE: When connected to Crestron Fusion, the time is automatically set from Crestron
Fusion. Any settings made here do not apply.
• Use Time Server Synchronization
1. Set Enable Time Synchronization to On.
2. Enter the time server’s IP address or host name in the Time Server field.
3. Click Synchronize Now to sync Crestron Mercury with the specified time
server.
• Set the Time Manually
1. Set Enable Time Synchronization to Off.
2. Select the time zone from the Time Zones list.
3. Enter the time (in 24 hour format) in the Time(24hr Format) field.
4. Select the date from the Date field.
5. Click Save Changes to apply any changes. Click Revert to revert back to the
previously used settings.