16 • TSW-560/TSW-760/TSW-1060: Touch Screens Supplemental Guide – DOC. 7927G
• Tap On or Off next to Enable to turn the digital clock screensaver on or off
during standby timeout
• Tap On or Off next to 24 Hour to turn 24-hour time format on or off for the
digital clock.
• Tap the up and down arrow buttons under Screen Saver Brightness to increase
or decrease the screensaver brightness from 0 to 100%.
Tap < BACK to return to the Standby Timeout screen.
Tap < BACK on the Standby Timeout screen to return to the Setup screen.
Application Selection
On the Setup screen, tap Application Selection to display the Application Setup screen.
Application Setup Screen
Use the Application Selection screen to select a touch screen application from the
available selections.
User Project is selected by default, which is used when a custom
project is loaded to the touch screen.
Swipe up or down through the list, and then tap an application to select it. Tap Confirm
Selection to confirm the selection or tap Cancel to return to the previous screen.
Once confirmed, the touch screen reboots with the new application running.
NOTE: Each application uses a unique setup procedure for registering and configuring
the application. For more information on setting up each application, refer to
"Application Setup" on page
54.
Tap < BACK to return to the Setup screen.
To Next Page
Loading...
