52 • TSW-560/TSW-760/TSW-1060: Touch Screens Supplemental Guide – DOC. 7927G
Control System
Click Control System to configure a connection to a Crestron control system.
Settings Tab - Control System
• Encrypt Connection: Toggle the switch to turn on or off an encrypted connection
to the control system.
• Control System Username: If Encrypt Connection is enabled, enter a username
for the encrypted connection.
• Control System Password: If Encrypt Connection is enabled, enter a password
for the encrypted connection.
• Confirm Password: Reenter the password set for Control System Password.
• Room ID: Enter a control system room ID to associate with the touch screen (for
connections with the Crestron Virtual Control server-based control system)
NOTE: For more information on connecting the touch screen to Crestron Virtual
Control, refer to the help file in the Crestron Virtual Control web configuration
interface. To access the help file, click the question mark button on the top
left of the page.
• IP ID: Enter an IP ID for connecting the touch screen to the control system.
• IP Address/Hostname: Enter the control system IP address or hostname.
To Next Page
Loading...
