Supplemental Guide – DOC. 7927G TSW-560/TSW-760/TSW-1060: Touch Screens• 27
Configuration via Web Interface
The touch screen may be monitored and configured using the included web configuration
interface. The configuration interface is accessible from a web browser if the touch
screen IP address is known.
To access the configuration interface:
1. Open a web browser.
2. Enter the touch screen IP address into the browser URL field. The configuration
interface is displayed (TSW-1060 shown).
NOTE: If authentication is enabled for the touch screen, an administrator
username and password must be entered prior to accessing the web
configuration interface. For more information on configuring authentication
settings, refer to "Authentication Management," starting on page
40.
Web Configuration Interface
The configuration interface provides a Status tab for monitoring touch screen settings
and a
Settings tab for configuring touch screen settings and for selecting a touch screen
application. The device hostname is displayed at the top left of the page.
If the Crestron room scheduling application is running on the touch screen, the web
configuration utility provides additional configuration options for the room scheduling
application. For more information on configuring the scheduling application, refer to
"Configuration via Web Interface" in the Crestron Room Scheduling Panels Operations
Guide (Doc. 8205) at www.crestron.com/manuals
.
To Next Page
Loading...
