Supplemental Guide – DOC. 7927G TSW-560/TSW-760/TSW-1060: Touch Screens• 37
• Hard Key
‒ Backlight: Toggle the switch to enable or disable the hard key backlight.
‒ Backlight Brightness: If Backlight is enabled, enter a value (1‒100) for the
key backlight brightness.
‒ Backlight Auto Brightness: If Backlight is enabled, toggle the switch to turn
automatic brightness control for the key backlight on or off.
‒ ALS Threshold Value: If Backlight and Backlight Auto Brightness are both
enabled, enter a value (1‒100) for the backlight button ALS threshold, which
is used for switching between high and low auto-brightness presets.
‒ Backlight High Preset: Enter a value (1‒100) for the key backlight high
brightness preset.
‒ Backlight Medium Preset: Enter a value (1‒100) for the key backlight medium
brightness preset.
‒ Backlight Low Preset: Enter a value (1‒100) for the key backlight low
brightness preset.
‒ Wakes LCD: Toggle the switch to turn the ability to wake the LCD display by
tapping the hard keys on or off.
• Screensaver and Standby
‒ Standby Timeout: Enter a standby timeout duration (1‒120 seconds) for the
touch screen.
‒ Enable Screensaver: Toggle the switch to enable or disable displaying a
screensaver on the touch screen during standby timeout.
‒ Enable 24 Hour Digital Clock: Toggle the switch to enable or disable
displaying a 24-hour digital clock on the touch screen during standby timeout.
‒ Brightness: Enter a value (1‒100) for the LCD display brightness during
standby timeout.
Fusion Cloud Settings
NOTE: If connecting to a Crestron Fusion® software on-premises server, connections are
made using either traditional (outbound) or inbound communications. For more
information, refer to the Crestron Fusion 10 On-Premises Software Getting Started
Guide (Doc. 7685) at
www.crestron.com/manuals.
• Fusion Cloud: Toggle the switch to enable or disable a connection to a Crestron
Fusion Cloud server. This connection is only applicable when the scheduling mode
is set to
Crestron Default or User Project.
• Fusion Cloud URL: Enter the URL used to connect the touch screen to the desired
Crestron Fusion Cloud server.
To Next Page
Loading...
