Crestron TSW-760 Supplemental Guide

Supplemental Guide – DOC. 7927G TSW-560/TSW-760/TSW-1060: Touch Screens• 5
The main Setup screen is displayed (TSW-1060 shown).
TSW-1060 Setup Screen
NOTE: The touch screen also provides a web configuration interface that may be used to
view and configure various touch screen settings. For more information, refer to
"Configuration via Web Interface," starting on page
27.
The Setup screen provides buttons for Ethernet setup, IP table setup, audio setup,
display setup, standby timeouts, application selection, and diagnostics. There is also a
button to toggle system messages on or off and an
About button that provides
information about the touch screen. Additionally, the Setup screen shows the IP address,
the hostname, and the MAC address of the touch screen.
The functions of each button are detailed in the following pages of this guide.
NOTE: A toolbar is present on the bottom of all setup screens. The toolbar provides a
gear button that may be tapped to return to the Setup screen and a Save & Exit
button that may be tapped to save all settings, to exit the setup screens, and to return
to the selected scheduling application.

Crestron TSW-760 Specifications

General

Resolution	1280 x 800 pixels
Touch Technology	Capacitive
Network	10/100 Ethernet
Operating System	Crestron OS
Operating Temperature	32° to 104°F (0° to 40°C)
Memory	2 GB RAM
Display Size	7 in
Wi-Fi	802.11a/b/g/n
Bluetooth	Bluetooth 4.0
Power	PoE (Power over Ethernet)
Mounting	table top mount