29
2.4 CONNEXION AREA
3 INSTALLATION
This paragraph deals with installation of the equipment.
Installation and initial commissioning should be carried out by an electrician or professional installer in
accordance with the standards currently in force (for leisure boats the applicable international standard is
ISO13297).
The installer should familiarize himself with this operating manual and inform users of the instructions for
use and the safety warnings set out in the manual.
OTD and temperature probe (not provided)
Output DC connectors
WAGO WINSTA 770-103
(ref. CRISTEC: 30024064)
2 CANBUS connectors (not
provided)
To Next Page
Loading...
