Page 40
PROGRAMMING DAYLIGHT SAVING ADJUSTMENTS - P817E - P822E
As the Elite controller has a real time clock compliant with minutes & hours of the day, days of the week and months
of the year, provision has been made for automatic adjustments for daylight saving. This block of addresses
provides the Elite with the information required to perform the daylight saving adjustments as required.
P817E 0-5E Daylight Saving Start Sunday - This is the Sunday number in the month that daylight saving will
begin (values of 1-5 are allowed). Default = 1
P818E 0-12E Daylight Saving Start Month - This is month in which the above Sunday will occur. (Values of 1-
12 are allowed). Default = 10
P819E 0-24E Daylight Saving Start Hour - This is the hour that daylight savings will begin (values of 0-24 are
allowed). Default = 2
P820E 0-5E Daylight Saving End Sunday - This is the Sunday number in the month that daylight savings
will end (values of 1-5 are allowed). Default = 3
P821E 0-12E Daylight Saving End Month - This is the month in which the Sunday number will occur (values
of 1-12 are allowed). Default = 3
P822E 0-24E Daylight Saving End Hour - This is the hour that daylight savings will end (values of 0-24 are
allowed. Default = 3
TIME ZONE PROGRAMMING - P791E - P814E
This block of addresses are used to define the time zones used by outputs, users and the Auto Arm/Disarm feature.
Time zones require a start and a finish time with the effective window as the difference between start and finish. For
this reason the finish time value must be higher than the start value. All times are set in 24 hour clock format.
P791E 1-8E TZ1 days of the week - Where 1-7 represent the days of the week which the time zone
will operate where 1 = Sunday, 2 = Monday etc. A value of 8 at this address will invert
the TZ function so that instead of being effective during the window created by the start
and finish times, the TZ is effective during the times outside the window set by the start
and finish times.
P792E 0000 - 2359E TZ1 Start time - This is the time when the TZ will start. Use 24 hour format. (HHMM)
P793E 0000 - 2359E TZ1 Finish time - This is the time of day when the TZ will finish. The finish time must
be greater than the start time. Use 24 hour format. (HHMM)
There are 8 time zones available and they occupy addresses P791E to P814E. Each time zone requires 3
addresses to be assigned.
P791E TZ1 Day of the week P803E TZ5 Day of the week
P792E TZ1 Start Time P804E TZ5 Start Time
P793E TZ1 Finish Time P805E TZ5 Finish Time
P794E TZ2 Day of the week P806E TZ6 Day of the week
P795E TZ2 Start Time P807E TZ6 Start Time
P796E TZ2 Finish Time P808E TZ6 Finish Time
P797E TZ3 Day of the week P809E TZ7 Day of the week
P798E TZ3 Start Time P810E TZ7 Start Time
P799E TZ3 Finish Time P811E TZ7 Finish Time
P800E TZ4 Day of the week P812E TZ8 Day of the week
P801E TZ4 Start Time P813E TZ8 Start Time
P802E TZ4 Finish Time P814E TZ8 Finish Time
To Next Page
Loading...
