Page 74
Programming Daylight saving Adjustments
P817E Daylight saving start Sunday - Default 1 Page 40
P818E Daylight saving start month - Default 10 Page 40
P819E Daylight saving start hour - Default 2 Page 40
P820E Daylight saving end Sunday - Default 3 Page 40
P821E Daylight saving end month - Default 3 Page 40
P822E Daylight saving end hour - Default 2 Page 40
Setting the Real Time Clock
P823E Set day of the week (1 -7 where 1 = Sunday) Page 39
P824E Set time (HHMM) Page 39
P825E Set day of the month (1 - 31) Page 39
P826E Set month (1 - 12) Page 39
P827E Set year Page 39
** Upload/Download Security Code **
P828E XXXXXXXX. Up to 8 digit security code Page 54
Dynamic Data
P830E Misc system flags 1 = Spare 5=Spare Page 41
2 = Spare 6=Spare
3 = Spare 7=Spare
4 = Spare 8=Daylight saving active
P831E Display keyboard address Page 41
P832E Display partitions assigned to this keypad (1=A, 2=B, 3=C) Page 41
P833E Display software version Page 41
Printing Events
P834E Start event printing Page 41
** Manually Answering an In-coming Call **
P835E Answer incoming call (user initiated) Page 54
Walk Test Mode
P836E Toggle walk-test mode ON/OFF Page 42
Temporary Output Disable Mode
P837E Temporary Output Disable mode - Outputs 1-8 Page 41
EE² Upload/Download
P838E Write to EE² board on serial port. Page 41
P839E Copy from EE² board on serial port to panel. Page 41
Reset to Defaults
P840E Reset user codes Page 42
P841E Reset communicator parameters Page 42
P842E Reset radio parameters Page 42
P843E Reset PA & Voice Board Parameters Page 42
P844E Reset All other Parameters Page 42
P845E Reset Everything back to factory Default Page 42
Clear Output Parameters
P846E Clear all output parameters (outputs 1 - 8) Page 41
Clear Memory Events
P847E Clear the 255 event Memory Buffer Page 42
P848E Clear unreported PA events Page 42
Active Time Zones
P849E Active Time-Zones Page 41
PA Board Output ON Message
P851E PA Board Output #1 On Message - Default 0
To Next Page
Loading...
