CS Instruments FA 550 User Manual

Operation
Page 25 FA 550 V1.00
12.3.2.1 Calibration
Settings  Sensor Setup Calibration
-24.675 °Ctd
-24.675 °Ctd
Here, a one-point calibration can be performed
For the Calibration select with button „“ the
menu „Reference Val.“ and open the input
menu with „OK“.
Input / change of the value by selecting the
respective position with button „“and
entering by pressing button „OK“ .
By pressing the button „Calibrate“ the new
reference value will be taken over.
A calibration could be set back to „out of
factory“ settings with button „Reset“.
Leaving the menu with „back“

CS Instruments FA 550 Specifications

General

Brand	CS Instruments
Model	FA 550
Category	Accessories
Language	English