Calibration / Adjustment
Page 35 FA 550 V1.00
13 Calibration / Adjustment
From the manufacturer
According to DIN ISO certification of the measuring instruments we recommend regular
calibration and, if necessary, adjustment of the instrument by the manufacturer. The
calibration cycles should fit your internal scheme. In the course of the DIN ISO certification,
we recommend for FA 550 a calibration cycle of one year. If requested we can carry out the
calibration on your premises.
14 Warranty
If you have reason for complaint, we will of course repair any faults free of charge if it can be
proven that they are manufacturing faults. The fault should be reported immediately after it
has been found and within the warranty time guaranteed by us. Excluded from this warranty
is damage caused by improper use and non-adherence to the instruction manual.
The warranty is also cancelled once the measuring instrument has been opened provided
this is not described in the instruction manual for maintenance purposes. This is also the
case if the serial number has been changed, damaged or removed.
The warranty time for FA 550 is 12 months for the instrument and 6 months for accessories if
no other terms have been agreed. Warranty services do not extend the warranty time.
If in addition to the warranty service necessary repairs, adjustments or similar are carried out,
the warranty services are free of charge but there is a charge for other services such as
transport and packing costs. Other claims, especially those for damage occurring outside the
instrument are not included unless responsibility is legally binding.
After-sales service after the warranty time has elapsed
We are, of course, there for you after the warranty time has elapsed. In the case of function
faults, please send us your measuring instrument with a brief description of the defect.
Please also indicate your telephone number so that we can contact you if necessary.
To Next Page
Loading...
Need help?
General
