CS Instruments FA 550 User Manual

Operation
Page 30 FA 550 V1.00
12.3.5 Alarm
Settings  Alarm Setup
The Alarm could be activated / deactivated with
the option button „Alarm“, selecting it with „“
and change it with button „OK“
deactivated.
activated.
The alarm could be set to one of the values (
units), see picture „Unit Alarm”.
„Value“ defines the alarm value, here -60°Ctd.
„Hysterese“ defines the hysteresis value
With button „overrun“ or. „underrun“ the way
how the alarm is triggered
Overrun: Value is exceeding the „Value“
Underrun: Value is going below „Value“

CS Instruments FA 550 Specifications

General

Brand	CS Instruments
Model	FA 550
Category	Accessories
Language	English