CTC Union GSW-3424M User Manual

Chapter 6. Manage / Configure the Switch
104
2. Force-Authorized: This mode will force the port always being authentication successful in 802.1x process and the
real authentication result will be ignored.
3. Force-Unauthorized: This mode will force the port always being authentication fail in 802.1x process and the real
authentication result will be ignored.
4. None: This mode will disable 802.1x operation on this port.
And you can see current 802.1x status on each port.
4). IP Filter Configuration
This function is used to configure IP Filtering function of port. An IP address with a subnet mask can be defined for
each port. If this function is enabled, only devices with IP address in the subnet can access network through the port.
Because it is a subnet specified by IP address/Network ID Number(0~32, or called Subnet Mask), the start IP address,
end IP address and allowed IP address number are shown in the table.
If some specified IP address will be assigned, set the Subnet Mask as 32. For example, 192.168.1.82/32.

CTC Union GSW-3424M Specifications

General

Brand	CTC Union
Model	GSW-3424M
Category	Switch
Language	English