Using an improper fuse
WHAT CAN HAPPEN
An improper fuse can cause damage to
the electrical system, which could lead to
a fire.
HOW TO AVOID THE HAZARD
Always use a fuse of the specified rating.
Never use a material in place of the
4. Turn the key to “ON” and turn on the
electrical circuit in question to check if
the device operates.
5. If the fuse immediately blows again, have
a service center check the electrical
system.
6. Install the battery compartment cover.
Replacing a headlight bulb
If a headlight bulb burns out, replace it as
follows.
1. Lift the hood up.（See pages 8-8 for hood
opening and closing procedures.）
2. Remove the cover at the rear of the
headlight by pulling it off.
Specified Fuse:
Main Fuse:
Headlight Fuse:
ECU Fuse:
Auxiliary DC Jack Fuse:
Signaling System Fuse:
2WD/4WD Fuse
Backup Fuse:
Speedmeter/ECU
-normal open Fuse:
To Next Page
Loading...
Need help?
General
