Cub H16 - REDARC REDVISION TVMS (Optional); Battery Management

© CUB CAMPERS • H16 OWNER’S MANUAL • REVISION 1 – 31/10/2023 PAGE 22 of 53
REDARC REDVISION TVMS (if optioned)
If optioned the REDARC display comes with TVMS (Total Vehicle Management System) and
includes water level monitoring on the display (the standard model does not have this feature)
For safety information and manufacturer instructions refer to the REDARC – RedVision User
Manual provided. There is also a RedVision App that replicates MOST of the display and
switching features of the Display available in the Google Play Store or the Apple App Store.
13. BATTERY MANAGEMENT
REDARC BMS30
Click for REDARC Battery Management System User Manual
Click for REDARD BCDC Battery Charger User Manual
The H16 is fitted with a REDARC BMS30 battery charger as standard. For safety information
and manufacturer instructions for these Battery Chargers please refer to the respective
REDARC BMS Owner’s Manuals provided.
For battery charging when connected to mains power and when
connected to the tow-vehicle
• Your REDARC Manager30 gives an accurate picture of your battery percentage and
time until full/empty. Make use of the display screen and/or phone app.
• You can always start the vehicles engine and utilize the DC-DC charging when you are
getting low. You cannot always use a generator, especially in national parks but you
can run your vehicle. It may only need a small amount to get you through until the
next day when you may be back on the road again. You will need to rev your engine to
between 1,200 RPM and 2,200 RPM to effectively charge your battery. Make sure to
warm your engine first for a few minutes on idle before you rev your engine to avoid
engine damage.