CUBICON Style Plus-A15 Series User Manual
Cleaning of the
Heating Bed
As for the typical cleaning, clean the pollutant on the surface with a scraper and dry cotton
cloth.
* Replacement of the heating bed of which the coating has damaged due to the usual use is
excluded from the free warranty coverage.
If it is highly polluted, clean it only with high purity acetone.
* Since cleansers (wet wipes) available in the market may contain an element that damages
the coating of the bed, never use it.
If an error occurs during Auto Leveling, check whether the nozzle accurately contacts the
heating bed, and retry after cleaning the heating bed and the tip of the nozzle. (Cleaning with
an iron brush is recommended.)
If the error continues, the inspection/repair through a service center are recommended.
Preparation for
Requesting a
Warranty Service
If any abnormality occurs, record the file, the inner part of the printer, and LCD display with a
photo/video, which shall be sent along with the recent logs by saving them in a USB memory
stick through Settings -> System -> System Log.
To Next Page
Loading...
Need help?
General