CUBICON Style Plus-A15 Series User Manual
Assembling and Disassembling the Filament Hose
1 After opening the Ext cover as shown in the
picture, check whether the filament hose that is
attached to the feeder is twisted.
2 Fix the filament hose to the fitting. After fixing
it, check whether the fitting is correctly fixed
by checking whether it is fixed.
3 In case the filament hose needs to be removed,
press the fitting in the direction of the arrow so
that the hose can be removed. Be cautious that
there is a risk of damage to the fitting or the
hose if you pull the filament hose with an
excessive force.
To Next Page
Loading...