CUBICON Style Plus-A15 Series User Manual
Location of Labels
If it is touched during the operation, there is a risk of burn due to high
temperature.
There is a risk of finger injury.
A display part for the distinction from the previous Style product
(Extruders of Style and Style Plus are not compatible.)
Display of the product specification according to the Safety Control Act
A display part for cautions regarding the use of the product and business
hours of the Service Center
A display part for cautions regarding the damage to NFC
Since high current power is applied to the heating bed, be cautious about an electric
shock when touching the bed (especially when touching the power supply module of the
bed).
To Next Page
Loading...
Need help?
General