Cubicon Style Plus-A15 Series - Print

CUBICON Style Plus-A15 Series User Manual
Print
Print is a screen that can monitor the printing status in real-time when the printer is printing.
● File Name: Only the data that has been created in Cubicreator is supported, and Style Plus-A15
only supports a file with .cfb as the file extension.
● Thumbnail: It displays the shape of actual printout as a thumbnail.
● Elapsed time: The time that the printing actually has progressed is displayed.
● Progress Rate: Actual printing progress rate is displayed as a bar graph.
● Remaining Time/Estimated Time: Remaining time or estimated time for the current printout is
displayed. As for the switching of info, the info type changes when the related text is touched.
● Pause/Resume: Current printing state can be paused or resumed. When it is paused, the printing
can be restarted from the point that was printed through Resume.
● Stop: Current printing is completely stopped. It can’t be restored to the previous state, and it must
be restarted from the start.
● File Info: Info of the current printout can be viewed.
● Camera: A video of printing can be viewed in real-time through the built-in camera. (For models
that support a camera only)
29