CUBICON Style Plus-A15 Series User Manual
User Interface
In this chapter, the overview of the user interface (UI) of Style Plus-A15 is provided.
Overview
Style Plus-A15 features 5 Inch touch screen, and each screen is distinguished into 4 areas.
The touch screen is located on the center of top of the device, but the display may not be clearly visible if
it is seen from some other angles.
Tasks such as followings can be executed through the touch screen UI.
● Monitoring of printer status/printing status
● Loading/unloading of a filament
● Preheating function
● Display of the remaining amount of a filament / the extruder temperature / the bed temperature
● Viewing of sliced file info and execution of printing/copying functions
● Motion control function of each operating part
● Execution of the self-inspection function for repair
● Setting of various device configuration values and initialization function
● Setting of LAN and Wi-Fi access
● Setting of each language
● Supporting the upgrade of the device
● Printing history viewing function
● Device info viewing function
● System log viewing function and copying function
26
To Next Page
Loading...