To Next Page
K
Karen McdonaldSep 13, 2025
What to do if there is media to drain in my Culligan Water Dispenser?
- JJessica GomezSep 13, 2025
To resolve media going to drain in your Culligan Water Dispenser, check or replace the backwash flow control washer(s).
What to do if there is media to drain in my Culligan Water Dispenser?
To resolve media going to drain in your Culligan Water Dispenser, check or replace the backwash flow control washer(s).
General| Brand | Culligan |
|---|---|
| Model | CTM 21 |
| Category | Water Dispenser |
| Language | English |
Lists the necessary components and materials required for installing the filter system.
Explains the process and quantities for loading filter media into the tank, including freeboard.
Describes the steps for mounting the control valve onto the tank adapter, including lubrication.
Illustrates the installation of the plumbing adapter and flow meter, with critical soldering warnings.
Covers good plumbing practices, including the use of unions and bypass lines for installation.
Outlines preparation and cable routing guidelines for wiring the controller and system components.
Outlines the disassembly and reassembly process for rebuilding the pilot valve.
Addresses service issues related to the drain line flow controller, including potential clogging.
Provides a table of common problems, check procedures, and potential causes for system issues.
