5 — MONITOR MENU
Curtis 1232E/34E/36E/38E & 1232SE/34SE/36SE/38SE Manual, os 31 – May 2017 Return to TOC
pg. 76
Monitor Menu: CUTBACKS
VARIABLE DISPLAY RANGE DESCRIPTION
Motor Temp Cutback 0 – 100% Displays the current available as a result of \the motor temperature cutback
function.
A value of 100% indicates no cutback in current.
MotorTempCutback 0 – 4096
0x3581 0x00
Controller Temp Cutback 0 – 100% Displays the current available as a result of the controller temperature
cutback function.
A value of 100% indicates no cutback in current.
ControllerTempCutback 0 – 4096
0x35F3 0x00
Undervoltage Cutback 0 – 100% Displays the current available as a result of the undervoltage cutback
function.
A value of 100% indicates no cutback in current.
UndervoltageCutback 0 – 4096
0x3605 0x00
Overvoltage Cutback 0 – 100% Displays the current available as a result of the overvoltage cutback
function.
A value of 100% indicates no cutback in current.
OvervoltageCutback 0 – 4096
0x3604 0x00
Monitor Menu: MOTOR TUNING
VARIABLE DISPLAY RANGE DESCRIPTION
Motor RPM –32768 – 32767 rpm Motor speed in revolutions per minute.
This is the raw value (compare to the ltered value under the Motor menu,
page 73). Use Motor_RPM for VCL and CAN applications.
Motor_RPM –32768 – 32767
0x3207 0x00
Base Speed Captured 0 – 65535 rpm Displays the value of the motor base speed captured in the most recent
acceleration. This value is used to set the FW Base Speed parameter, using
the FW Base Speed set procedure described on page 56 or using the ACIM
motor characterization procedure (Chapter 8A).
Base_Speed_Captured 0 – 65535
0x35BE 0x00
Test Field Current 0 – 800 A Field test current reading to be used during the ACIM motor characterization
procedure (Chapter 8A).
Test_Field_Current 0 – 800
0x3873 0x00
To Next Page
Loading...
