User Guide DDOC0199-000-A9
1-Slot Data Transport System (CSfC) 13 - 25 Command Line Interface
© 2024 Curtiss-Wright Defense Solutions Revision 1.0
NOTE
See rmcctl --serv command for information on controlling Ethernet interfaces targets will be
available on.
Example: Start all the iSCSI targets on the RMC in slot 0.
Example: Stop all the iSCSI targets on the RMC in slot 0.
cw_dts> istarget --start -s 0
[istarget]
RMC_S0_P1_L0: iqn.2015-05.net.cwnas.iscsi:rmc0p1 is_tgt_en=1 status=OK
RMC_S0_P2_L0: iqn.2015-05.net.cwnas.iscsi:rmc0p2 is_tgt_en=1 status=OK
[!istarget] OK
cw_dts> istarget --stop -s 0
[istarget]
RMC_S0_P1_L0: iqn.2015-05.net.cwnas.iscsi:rmc0p1 is_tgt_en=0 status=OK
RMC_S0_P2_L0: iqn.2015-05.net.cwnas.iscsi:rmc0p2 is_tgt_en=0 status=OK
[!istarget] OK
To Next Page
Loading...