User Guide DDOC0199-000-A9
1-Slot Data Transport System (CSfC) 8 - 8 Operation
© 2024 Curtiss-Wright Defense Solutions Revision 2.0
Example
8.5.3 Services
Services are not available until the drive is mounted as a NAS drive.
8.5.3.1 Assign Services
NOTE
Services can be assigned to an unpartitioned or partitioned RMC module.
Assign NAS services to an unpartitioned 100GB RMC module.
Command:
rmcctl --serv NAS
Example
Assign NAS services to partition 1 of a 100GB RMC module with one partition.
Command:
rmcctl -p 1 --serv NAS
Example
Assign NAS services to partitions 1 and 2 of a 100 GB RMC module with three partitions.
NOTE
Must be done as two separate commands.
Command:
rmcctl -p 1 --serv NAS
rmcctl -p 2 --serv NAS
Example
Assign NAS services to partitions 1 through 4 of a RMC module with four partitions.
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1
1 10 GB NONE 0 na 0 na 0 ----
RMC_S0: 1 1 1
2 50 GB NONE 0 na 0 na 0 ----
RMC_S0: 1 1 1 3 20 GB NONE 0 na 0 na 0 ----
RMC_S0: 1 1 1 4 20 GB NONE 0 na 0 na 0 ----
[!rmcctl] OK
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 100GB NAS 0 na 0 na 0 rmc0
[!rmcctl] OK
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 100GB
NAS 0 na 0 na 0 rmc0p1
[!rmcctl] OK
cw_dts> rmcctl
[rmcctl]
RMC_S#: ins hcryp osdr p# size serv scryp osdm fmt mnt rem mntpoint
*********************************************************************************
RMC_S0: 1 1 1 1 33 GB NAS 0 na 0 na 0 rmc0p1
RMC_S0: 1 1 1 2 33 GB NAS 0 na 0 na 0 rmc0p2
RMC_S0: 1 1 1 3 33 GB NONE 0 na 0 na 0 ----
[!rmcctl] OK
To Next Page
Loading...