User Guide DDOC0199-000-A9
1-Slot Data Transport System (CSfC) 13 - 3 Command Line Interface
© 2024 Curtiss-Wright Defense Solutions Revision 1.0
Example: Turn on H/W encryption auto key loading. A subsequent load of a H/W encryption key will attempt to auto-mount
Example: Turn off auto-mounting of NAS RMC / partitions
Example: Turn off auto-mounting of NAS RMC / partitions at POR
Example: Turn off auto-mounting of NAS RMC / partitions at first insertion
Example: Turn off auto-mounting of NAS RMC / partitions at subsequent insertion
Example: Turn off auto-mounting of NAS RMC / partitions at canceled removal
Example: Turn on read only mounting option for NAS RMC / partitions. Allowed during auto-mounting only. Doesn't
affect CLI mounting.
Example: Turn off auto-starting of iSCSI target RMC
Example: Turn off auto-starting of iSCSI RMC at POR
Example: Turn off auto-starting of iSCSI RMC at first insertion
Example: Turn off auto-starting of iSCSI RMC at subsequent insertion
Example: Turn off auto-starting of iSCSI RMC at canceled removal
Example: Turn on read only option for iSCSI RMC. Valid during auto-mounting only. Doesn't affect CLI iSCSI
target starting.
Example: Configure the block size for the auto started iSCSI targets.
Example: Restart the auto mounter/starter daemon for the RMC described by --slot.
amnt -s 0 --key --on
amnt -s 0 --nas --off
amnt -s 0 --nas --por --off
amnt -s 0 --nas --fin --off
amnt -s 0 --nas --sin --off
amnt -s 0 --nas --can --off
amnt -s 0 --nas --ro --on
amnt -s 0 --iscsi --off
amnt -s 0 --iscsi --por --off
amnt -s 0 --iscsi --fin --off
amnt -s 0 --iscsi --sin --off
amnt -s 0 --iscsi --can --off
amnt -s 0 --iscsi --ro --on
amnt -s 0 --iscsi --blk 512
amnt -s 0 --restart
To Next Page
Loading...