Curtiss-Wright DTS1+ CSfC - Page 99

User Guide DDOC0199-000-A9
1-Slot Data Transport System (CSfC) 13 - 8 Command Line Interface
© 2024 Curtiss-Wright Defense Solutions Revision 1.0
13.3.4 cmlog
Description:
The cmlog command allows a user to view the error log of the DTS crypto module. Only the crypto
officer has permission to clear the error log
Syntax:
cmlog [-h | --help | -v | --version]
cmlog [-c | --clear]
cmlog
cmlog - [options]
Options:
-h, --help: .....................Print help message.
-v, --version: .................Report application version.
-c, --clear: .....................Clear error log.
Returns:
0 on success, else error
Example: View crypto module error log
Example: Clear crypto module error log
cw_dts>
cmlog
[cmlog]
CMLOG: Currently Logged Errors
(0x0c20):[SECURITY] - tamper event: T1
status=OK
[!cmlog] OK
cw_dts>
cmlog-c
[cmlog]
CMLOG: status=OK
status=OK
[!cmlog] OK