EasyManua.ls Logo

Curtiss-Wright DuraCOR 311 - Microsd Card Expansion; Installation; Figure 8: Microsd Card Slot; Figure 9: Microsd Card Removal

Curtiss-Wright DuraCOR 311
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DuraCOR 311
Chapter 2 Operational Description
MNL-0667-01 Rev B2
ECO-5941
Effective: 17 Mar 20
Page 17 of 72
MicroSD Card Expansion
The DuraCOR 311 also has the ability to use a microSD card for storage. A microSD card may be used
in conjunction with another storage device. All drives loaded are rated to the same or greater
environmental specifications as the system.
Figure 8: MicroSD Card Slot
Caution! ESD Sensitive Components
Follow standard ESD and FOD controls to avoid damage to the internal components.
Installation
Power off system and remove the bottom cover
Slide the microSD socket cover toward the board edge
Figure 9: MicroSD Card Removal
Lift socket cover
Place the microSD card into the socket
SD
CARD

Table of Contents