Curtiss-Wright DuraCOR 311 - CPU Power Management

DuraCOR 311
Appendix C – BIOS Settings
Page 56 of 72
MNL-0667-01 Rev B2
ECO-5941
Effective: 17 Mar 20
CPU Power Management
Feature
Options
Description
Intel® SpeedStep(TM)
Enabled
Disabled
Enable/Disable processor
performance states (PStates)
Boot Performance Mode
Max
Performance
Max Battery
Select the performance state that the
BIOS sets before OS hand-off
Intel® Turbo Boost Technology
Enabled
Disabled
Enable to automatically allow
processor cores to run faster then the
base operating frequency if it's
operating below power, current, and
temperature specification limits. This
option is only valid for CPUs
supporting Intel® Turbo Boost
Technology
C-States
Enabled
Disabled
Enable processor idle power saving
states
Enhanced C-States
Enabled
Disabled
Enables or Disables C1E/C2E/C4E.
When enabled, CPU will switch to
minimum speed when all cores enter
CState
Max C-State
C6
C1
Controls the maximum C-State
allowed for the processor