Curtiss-Wright DuraCOR 311 - J2 I;O Connector; Figure 12: Duracor 311 J2 Front Pinout; Table 7: J2 Connector Information; Table 8: J2 Pinout

DuraCOR 311
Chapter 4 Connector Description
MNL-0667-01 Rev B2
ECO-5941
Effective: 17 Mar 20
Page 25 of 72
J2 I/O Connector
J2 contains 2x GbE ports, 4x USB ports, Remote Off signals, Zeroize signals, Write Protect signals, and
14x configurable I/O pins. The configurable I/O pins do not have any ESD protection.
Caution! ESD Sensitive Components
Follow standard ESD and FOD controls to avoid damage to the internal components.
Figure 12: DuraCOR 311 J2 Front Pinout
Table 7: J2 Connector Information
Receptacle
Use
Receptacle
Label #
# of
Pins
Wire Gauge
(AWG)
Amphenol (Glenair) Jam
Nut Receptacle
Part Number
Amphenol (Glenair)
Mating Connector
Part Number
I/O
J2
55
22-28
2M801-033-07M16-55SA
(801-033-07M16-55SA)
2M801-008-16M16-55PA
(801-008-16M16-55PA)
Table 8: J2 Pinout
J2
Pin
Signal Name
Description
Px Pin
J2 Pin
Signal Name
Description
Px Pin
J2_1
CONFIGURABLE_IO_79
P7_14
J2_29
CONFIGURABLE_IO_70
P7_5
J2_2
REMOTE_OFF
REMOTE OFF
J2_30
SYSTEM_GND
J2_3
CONFIGURABLE_IO_78
P7_13
J2_31
SYSTEM_GND
USB 1 GND
J2_4
GBE_CPU_D_N
GE1
J2_32
GBE_PORT2_B_N
GE2